Toro® STX-38 Stump Grinder is built for outstanding durability in the toughest conditions. Fully hydraulic operation means no chance of expensive belts breaking or slipping and no tension adjustments. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. And with easy-to-use TX-style controls and tracks for maneuverability and stability, the STX-38 is extremely operator-friendly. The STX-38's electronic fuel injection engine provides less maintenance, easier starting, and improved performance. Best of all, ground speeds of 4.5 mph allow you to spend more time grinding — and less time transporting the machine — for greater productivity.
- Intelli-Sweep® automatically adjusts cutting head sweep speed
- Turn stumps to chips quickly
- Hydraulically driven cutting head
- No tire ruts or flat tires
Features
Intelli-Sweep®
Intelli-Sweep® automatically adjusts cutting head sweep speed based on the load on the wheel, so the engine runs efficiently during heavy loads. This reduces machine stress, increases productivity and minimizes maintenance.
Faster and Easier
From pine to oak, the Toro STX hydraulic stump grinder turns stumps to chips quickly and efficiently.
Advanced Cutter Head
Hydraulically driven cutting head with 20 gpm hydraulic flow directly to cutter head for maximum performance.
High-Drive Track System
Low center of gravity and large footprint increases stability on hillsides. Tracks handle soft, wet ground conditions, climb curbs and allow zero-turn capability.
Specifications
| Cooling System |
Air Cooled |
| Cutter Depth Below Grade (inches) |
18 |
| Cutter Height Above Grade (cm) |
88.9 |
| Cutter Height Above Grade (inches) |
35 |
| Engine Make |
Kohler |
| Engine Model |
Kohler® Command PRO® ECV980 |
| Fuel Type |
Gasoline |
| Ground Speed Forward (km/h) |
6.7 |
| Ground Speed Forward (mph) |
4.5 |
| Ground Speed Reverse (km/h) |
6.7 |
| Ground Speed Reverse (mph) |
4.5 |
| Head Swing Arc Length (cm) |
132 |
| Head Swing Arc Length (inches) |
52 |
| Head Swing Sweep Arc (inches) |
60 |
| Hydraulic Flow Traction |
Duel hydrostatic traction drive-16 cc hydropumps with 15 gpm max flow to each side; 20 gpm gear pump flow to the piston motor driving the cutter head |
| Overall Height (cm) |
130 |
| Overall Height (inches) |
51 |
| Overall Length (cm) |
241 |
| Overall Length (inches) |
95 |
| Overall Width (cm) |
86 |
| Overall Width (inches) |
34 |
| Weight (kg) |
794 |
| Weight (lbs) |
1750 |
| Wheelbase (cm) |
56.5 |
| Wheelbase (inches) |
22.25 |
|
